Wiring products of "BOLERO" series are the embodiment of functionality and elegant design. Elegant silhouettes of products and high quality materials make the BOLERO series the perfect choice for classic and modern interiors of apartments, country houses, office and commercial facilities.

Vertical location of the casing provides easy installation and extra air circulation.

Precise alignment and secure installation of the casing on the wall provide points of fastening with the indication of dimensions between them.

Simple insertion of cables, wires through the stamped inlets for conductors on the rear and side walls of the casing. 

Multi-purpose anodized screws are protected against corrosion and are suitable for any type of screwdriver.

No need to write on breakers - a special marking tape is included in the standard scope of supply.

Small distribution board

Mounting method

Width in number of modular spacings

Number of rows

Colour

Degree of protection (IP)

Height

Width

Depth

RAL-number

Material housing

Type of cover

With transparent cover

Cover model

EMC-version

Extension possible

With mounting plate

Built-in depth

DIN-rail

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Surface plastic empty enclosure SCHRN-P-12 modules IP41 LIGHT IEK

Паспорт - 1 шт.
Суппорт для шин - 1 шт.
DIN-рейка - 1 шт.
Шина 6х9мм, 6 отв. - 1 шт.
Шина 6х9мм, 8 отв. - 1 шт.
Лента маркировочная - 1 шт.
Комплект метизов - 1 шт.

Easy insertion of cables and wires through stamped conductor entries on the rear and side walls of the housing.

The zero bus is mounted on a special panel. It can be easily removed and installed on the opposite side.

Precise alignment and secure installation of the housing on the wall are provided by mounting points with indication of dimensions between them.

The complete set of housings ensures simple and quick installation.

KREPTA 3 Wall-mounting plastic distribution enclosure 12 modules IP41 black

KREPTA 3 Корпус модульный пластиковый навесной ЩРН-П IP41. Краткое руководство по эксплуатации

Паспорта и РЭ

KREPTA 3 Wall-mounting plastic distribution enclosure 12 modules IP41 pine

Паспорт - 1 шт.
Суппорт для шин - 1 шт.
DIN-рейка - 1 шт.
Шина 6х9мм, 8 отв. - 1 шт.
Шина 6х9мм, 10 отв. - 1 шт.
Лента маркировочная - 1 шт.
Комплект метизов - 1 шт.

Винты, пластиковые дюбели, заглушки

Суппорт для установки клеммников, клеммники нейтрали и заземления

The cable markers of MKN series can be placed during installation of wiring, also after conductor termination and connection. Provided grooves allow for use of long letterings for wire markings. The MKN cable markers during operation can withstand temperatures within range from minus 30 to plus 70°C. The MKN cable markers must be installed at temperatures within operating range from minus 10±2°C to plus 50±2°C.

KREPTA 3 Wall-mounting plastic distribution enclosure 18 modules IP41 white

Electrical tapes are applied when performing industrial, constructional and domestic works for electrical insulation. IEK brand electrical tape is made on the basis of PVC. It is used as an insulation material. Electrical tape ensures air-tightness, protection from attack of moisture, salt, poor solvents etc. The range includes electrical tape of seven different colors: white, red, blue, yellow, green, black and yellow-green.

KREPTA 3 Flush-mounting plastic distribution enclosure 12 modules IP41 white

Zero bus is mounted on a special panel. It can be easily removed and installed on the opposite side. It provides high security: the live parts are closed to prevent the intentional touching. Self-extinguishes at a temperature of 950°C.

Fully equipped casing provide simple and quick installation.

KREPTA 3 Plastic Enclosure ShchRN-P-12 IP41 black door black IEK

Optical patch cords are used to switch optical communication lines and connect them to network and measuring equipment. An optical patch cord is a fiber optic cable terminated with an optical connector, if the cable is terminated with only one side, this kind of patch cord is called a pigtail. For our patch cords and pigtails we use only the best fiber produced by Corning, an important factor in the quality of the patch cord is also the quality of the connector and in our connectors we use only ferrules (Ferrule Connector) of the Japanese company Adamant.

The optical connecting cord is a patch cord terminated on different sides by different types of connectors. Pigtails can be single-mode and multi-mode.

For ease of use, the housing is provided with a change in the direction of opening the door. When lightly pressed, the door is removed from the latches and installed on the other side.

To protect against unauthorized entry and access to the contact group, a hole for sealing is provided.

Convenient plastic lock. It is possible to replace the plastic lock with a metal one.

The housing is sealed with a special gasket and additional glands.

Easy mounting and cable routing: large distance between the DIN rail and the rear wall of the housing (from 20 to 35 mm), distance between DIN rails from 125 to 130 mm.

Possibility of fitting an additional stepped holder for N and PE busbars.

Captive screws for 1/4 turn quick fixing. This allows you to significantly reduce installation time.

KMPn 2/13 - IEC IP 55 hinged plastic case for 13 modular machines. off

Ease of installation and cable routing: large distance between the DIN rail and the rear wall of the case (from 20 to 35 mm), distance between DIN rails from 125 to 130 mm.

Possibility of mounting an additional stepped holder for N and PE busbars.

Handy plastic lock. It is possible to replace the plastic lock with a metal one.

KMPn 2/12 IP55 hinged plastic enclosure for 12 modular vending machines. off

Шины N и PE с держателем и крышкой

Заглушки модульные и заглушки отверстий

Петли для навески дверцы

Замок с трехгранным ключом

The compact energy-saving lamps (types KEL, KL) are used as alternative light sources to incandescent lamps. The energy-saving lamps are designed for use in outdoor and indoor luminaires for industrial, social and household facilities. The high power energy-saving lamps (type KEL) are designed for use in outdoor luminaires and also for indoor lighting in industrial and public buildings. They substitute the incandescent lamps of power 200–1250 W. The compact energy-saving lamps of ECO series (type KELR) are designed for mass replacement of 75–100-watt incandescent lamps of main sizes installed in lighting systems in residential and public premises. KEL and KELR lamps comply with requirements of Customs Union Technical Regulations TR TS 004/2011, TR TS 020/2011, IEC 60968 and Russian Federation Government Decree No.602 of 20.07.2011. KL lamps comply with requirements of Customs Union Technical Regulation TR TS 004/2011, IEC 61199 and Russian Federation Government Decree No.602 of 20.07.2011.

Larger distance between the DIN-rail and back wall.
The DIN-rail is adjustable in depth, plastic tabs are used to install it.

Protection of casing against unauthorized access is provided by a triangular key lock.

The direction of opening the front panel can be easily changed both to right and left at the place of installation due to the presence of plastic hinges.

Removable holder of N and PE buses can be installed on the top and bottom of the casing onto the special fastening elements. N and PE bus are installed on a removable holder by means of simple latching in the seats.

Convenient and accurate installation of the casing is possible due to the special marking of fixing holes for mounting of the casing on the wall.

Easy and fast installation of glands for a variety of cross sections is possible due to break-out holes of different diameters, which are located on the top and bottom of the casing.

Surface plastic empty enclosure KMPn-12 IP66

Распаковка "KREPTA 7 Корпус пластиковый КМПн-12"

Light signaling indicators are intended for indicating the state of electric circuits.
They are applied in electric panels, industrial equipment and power supply objects.

Various color variants provide for the most efficient arrangement of panels and boards.

Mounting method	Поверхностного монтажа
Width in number of modular spacings	12
Number of rows	1
Colour	Белый
Degree of protection (IP)	IP41
Height, мм	200.0
Width, мм	255.0
Depth, мм	97.0
RAL-number	9016
Material housing	ABS пластик
EMC-version	Нет
Type of cover	Закрытого типа (закрывающаяся)
Built-in depth, мм	-
Cover model	Закрытого типа (закрывающаяся)
Extension possible	Нет
With transparent cover	Да
DIN-rail	Да
With mounting plate	Нет

KREPTA 3 Wall-mounting plastic distribution enclosure 12 modules IP41 white

Main specifications

Description

Basic documents

Design Features

Specifications

Documents

Set contains

Compatible Products

Analogs