OKL_fire.png

VR32I switch disconnectors are intended for non-automated commutation of AC circuits with rated voltage up to 690 V (50 Hz).
Used for installation in low-voltage complete devices such as lead-in distribution units of residential, public and industrial buildings, distribution boards and panels, control panels and boxes, etc.
VR32I switch disconnectors meet the requirements EN 60947-3.

Economical package made of polyethylene film of 150 microns thick provides optimal protection of the cable channel during transport and storage. And the information labels on the side and on the end provide extra convenience during storage.

Modern equipment and special additives used in the manufacture of the window profile by German manufacturer with a 25-year experience, allow to make a high-quality cable channel with unique properties.

Double lock provides tight connection of the cable channel cover with a base that allows to stack rigid objects (e.g., corrugated tube) inside the cable channel as well as to mount the cable channel on the ceiling.

In case of a short circuit it is reduced the risk of fire, because the material of which the channels cable of ELEKOR series are made, do not support combustion. This is confirmed by the test results. Cable channels of ELEKOR series correspond to the category PV-0.

The peculiarity of the material of which the channels cable of ELEKOR series are made, allows to mount it at low temperatures (-15 ° C).

End of the group package is protected with a three-layer cardboard providing additional protection during horizontal storage. Additional fixation with a stepping-tape in four places for uniform packaging.

Thanks to the double lock in combination with a high-quality material, the cover is closed so tightly that it can not be opened from the sides. You can open the cover only from the end of the cable channel.

Special additives provide high plasticity: even with strong bending the cable channel maintains its properties.

Installation duct

Colour

Width

Height

Flame accelerating

Category of resistance to burning in accordance with GOST 28779

Internal volume fill percentage

Insulation resistance at DC 500V

RAL-number

Quantity in packing

Transportation and storage temperature

Degree of protection (IP)

Material

Material quality

Type of fastening

Cover model

Length

Mounting temperature

Suitable for circuit integrity

Number of permanent partitions

Surface protection

Useful cross section

Паспорта и РЭ

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Cable duct 40/2x16 "ELEKOR" (30 m)

Number of plug-in partitions

With duct connector

Delivery on roll

Halogen free

Protection film

With cable fixing clip

Pre-stamping

Transparent

metra mini cable-channel 40/2x16mm two-section white IEK

Colour	Белый
Width, мм	40
Height, мм	16
Number of plug-in partitions	0
With duct connector	Нет
Transportation and storage temperature, °C	-25…60
Surface protection	Необработанная
Type of fastening	Перфорация на основании
Delivery on roll	Нет
Mounting temperature, °C	-5…60
Halogen free	Нет
Protection film	Нет
Cover model	Съемная
With cable fixing clip	Нет
Length, мм	2000
Pre-stamping	Нет
Material quality	ПВХ (PVC)
Number of permanent partitions	0
Suitable for circuit integrity	Нет
Material	Пластик
Flame accelerating	Нет
Degree of protection (IP)	IP40
Transparent	Нет
Cover model	Съемная
Useful cross section, мм²	520

metra mini cable-channel 40/2x16mm two-section white IEK

Main specifications

Specifications

Documents

Compatible Products

Analogs