Article: KKMK-16-230-01
KMI AC contactors of general industrial purpose are designed for load currents from 9 to 95A (AC-3). Intended for actuating, shutting down and reversing of asynchronous motors equipped with a short-circuited rotor for the applied voltage limited to 660V, remote control of lighting (AC-5a, AC-5b), heating circuits and various low-inductance loads (AC-1), switching three-phase capacitor batteries (AC-6b) and primary windings of three-phase low-voltage transformers (AC-6a). All unit types per load currents limited to 40A have a single group of auxiliary NO or NC contacts. Types per load currents exceeding 40A have two contact groups (NO and NC). KMI AC contactors 9-95A application includes fan, pump, thermal curtain, furnace, overhead-track hoist, unit, lighting and automated load transfer systems control.
  • Contactors KMI-K with values up to 20 kVAr inclusive use composite alloy NiAg10 with low transition resistance of the contact pair in the power contacts
  • Silver does not form an oxide film, thus preserving the characteristics of the contact pair for a long time.


Rated control supply voltage Us at AC 50HZ 230 V
Number of auxiliary contacts as normally open contact 2
Number of auxiliary contacts as normally closed contact 1
Number of main contacts as normally open contact 3
Rated blind power at 400 V, 50 Hz 16.7 kvar
Коммутируемая нагрузка Q при 230В 50Гц 8.5 kvar
Коммутируемая нагрузка Q при 690В 50Гц 24 kvar
Nominal rated current 24 A
Коммутационная износостойкость 200000 циклов
Rated insulation voltage Ui 690 V
Rated surge voltage invariability 6 kV
Nominal voltage AC 230, 400, 690 V

Operational parameters

Warranty period, years: 5

Logistic parameters

Individual Group Transport
Quantity 1 - 40
Units шт - шт
Barcode 4606056468076 - 4606056468083
Gross weight, kg 0.45 - 18
l, cm 9.4 - 39.5
b, cm 4.9 - 26.5
h, cm 13.4 - 29.5
Download full catalog