Heat-shrink sleeve TTU 14/7 green100 m/packing IEK
Product ID:
Main specifications
| Model | Тонкостенная |
| Inner diameter before heat-shrink, мм | 14 |
| Inner diameter after heat-shrink, мм | 7 |
| Colour | Зеленый |
| Length, м | 100 |
Advantages
- Wide range of various accessories ensuring easy and fast mounting.
- Protected from electricity stealing thanks to the possibility of sealing.
- Metal door is protected from corrosion owing to phosphatization and powder paint coating.
- Easily changing neutral buses support position.
- Universal packaging.
- Simple cable input thanks to the availability of easily dismountable side panels.
- Special empty enclosures construction provides for balancing the irregularities of surface intended for the empty enclosures mounting within 18 mm.
Design Features
Specifications
| Model | Тонкостенная |
| Inner diameter before heat-shrink, мм | 14 |
| Inner diameter after heat-shrink, мм | 7 |
| Colour | Зеленый |
| Length, м | 100 |
| Wall thickness before heat shrinkage, мм | 0,35±0,1 |
| Mounting temperature, °C | -10...50 |
| Min shrinkage start temperature, °C | 70 |
| For dielectric strength up to, кВ | ≥ 15 |
| Min full shrinkage temperature, °C | 125 |
| Volumetric electrical resistance, Ом на м | ≥ 1х10^14 |
| Tensile strength, Мпа | ≥ 10,4 |
| Extend to Break, процентов | ≥ 200 |
| With inner glue | Нет |
| AC 50 Hz operating voltage, В | 660 |
| Wall thickness after shrinking, мм | 0,7±0,1 |
| Shrink rate | 2:1 |
| Nominal cross section, мм² | 13 |
| Wire Diameter Range, мм | 7,3...13,0 |
| Type | Термоусадка |
| Material | Прочее |
| Operation temperature, °C | -55...125 |
Documents
Passports