Heat-shrink sleeve TTU 16/8 green100 m/packing IEK
Main specifications
| Model | Тонкостенная |
| Inner diameter before heat-shrink, мм | 16 |
| Inner diameter after heat-shrink, мм | 8 |
| Colour | Зеленый |
| Length, м | 100 |
Description
Are applied in low-voltage complete devices are used in distribution electric circuits of residential, commercial and industrial objects.
E47 A-meters are analog electromagnetic devices designed for measuring current in AC networks.
Electric measuring devices of E47 series correspond to the requirements of IEC 61010-1, IEC 61326.
E47 electric measuring devices are introduced into the State register of measuring equipment under No. 39231-08.
Operating Principle: A-meters devices with an electromagnetic system. They consist of a round coil with movable and rigid cores inside. When current flows through the coil windings, it creates an electromagnetic field magnetizing both cores making the similar core poles repel and axis with a needle spin. For protection from the negative influence of external magnetic fields, the coil and both cores are covered with a metal shield.
Design Features
Specifications
| Model | Тонкостенная |
| Inner diameter before heat-shrink, мм | 16 |
| Inner diameter after heat-shrink, мм | 8 |
| Colour | Зеленый |
| Length, м | 100 |
| Wall thickness before heat shrinkage, мм | 0,35±0,1 |
| Wire Diameter Range, мм | 8,3...15,0 |
| With inner glue | Нет |
| Min full shrinkage temperature, °C | 125 |
| Shrink rate | 2:1 |
| Mounting temperature, °C | -10...50 |
| Wall thickness after shrinking, мм | 0,7±0,1 |
| AC 50 Hz operating voltage, В | 660 |
| Min shrinkage start temperature, °C | 70 |
| Operation temperature, °C | -55...125 |
| Nominal cross section, мм² | 15 |
| Material | Прочее |
| Volumetric electrical resistance, Ом на м | ≥ 1х10^14 |
| For dielectric strength up to, кВ | ≥ 15 |
| Type | Термоусадка |
| Tensile strength, Мпа | ≥ 10,4 |
| Extend to Break, процентов | ≥ 200 |
Documents
Passports