Соединитель - 1 шт.
Паспорт - 1 экз. на ГУ

Electromagnetic contactors of KTI series are intended for use in control circuits for start and stoppage of 3-phase squirrel-cage induction motors supplied from mains with rated voltage up to 660 V, and also can be used for switching on/off other electrical units: lighting, heating devices, various inductive loads. Used with fans, pumps, furnaces, beam cranes and automatic load transfer systems.

Cable inlet is provided with a gland preventing damage to the cable. The gland is suitable for cables of different diameters.

Parts made of elastomeric materials such as O-rings, gaskets are resistant to aging.

Plastic pin on the power connector casing allows fixing the lid of the mating part of the connection and prevents possible unauthorized disconnection during mechanical impact on the connected cable due to its tension.

Pin contacts are made of electrical brass, and socket units are made of phosphorous bronze. To prevent corrosion, all the elements are nickel-plated.

The pressure caused by the contact slots of the contact plugs prevents an easy insertion and and extraction of the plug. The plug does not fall out from the socket during normal operation.

The screws used for mechanical and electrical connections are protected from corrosion and loosening.

CEE socket outlet

IEC-amperage

Voltage acc. EN 60309-2

Number of poles

Degree of protection (IP)

Nominal electric insulation strength

Identification colour

Operating voltage range

Military model

Clock hour position

Fixing device

Type of fastening

Presence of lock

Number of contacts

Max. conductor cross section

Model

Ambient temperature

Material

Nominal frequency

Connection system

Соединители штепсельные силовые (розетки, вилки, адаптеры) промышленного назначения типа ССИ. Краткое руководство по эксплуатации

Паспорта и РЭ

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Socket 123 fixed 2P+PE 32A 220V IP44 IEK

Соединитель - 1 шт.
Эластичный сальник (вложен внутрь корпуса) - 1 шт.

Cable ducts of ELECOR series with "pine" and "oak" textures are designed for installation of data, power and low-voltage electrical lines in living rooms and cottages during construction and renovation.

Fixed connectors have two cable inlets - bottom and top. In both inlets are provided with plastic membranes to provide a degree of protection IP, they can be cut off before installing the gland into the inlet.

To tighten the collet closing mechanism a nut with slots for unscrewing and screwing is used. A bead on hexagon surface is made to abut against it and prevents the dropping off the wrench. For easy screwing a nut with a hand, special retainer tangs are provided on the outer surface.

The design of portable connectors provides a collet closing mechanism made of elastic material. The design of the collet closing mechanism, due to the presence of teeth on the collets, ensures secure fixing of the cable in the casing when tightening the nut, and the desired IP degree of protection.

The 63A and 125A sockets have a "pilot" contact that turns on after the other pins of the plug are connected and opens first when disconnected. The pilot contact is located in the center of the contact circle of a 4 or 5-pin connector.

All connectors of MAGNUM series are provided with columnar-type clamps with two clamping screws. The screws are placed in the same direction for ease of installation. The clamp firmly secures the conductor, provides high contact pressure, low contact resistance, less heat. Ends of the screws are ground, that eliminates the cutting of live wires.

On the socket lid a convenient upper arm and lower hook are provided to open the lid. With the upper arm you can easily open the lid on a portable socket to connect it with one hand. Lower hook is useful for opening the lid of fixed or built-in socket.

In stationary connectors the lateral holes for screws, intended for the assembly of two halves of the casing are located inside the casing, and they are not visible from the outside. After the assembly the screws heads shall be recessed in a niche that excludes their damage.

IEC-amperage, А	32
Voltage acc. EN 60309-2	230 В 50-60 ГЦ , синий
Number of poles	3
Degree of protection (IP)	IP44
Nominal electric insulation strength, В	500
Operating voltage range, В	200...250
Fixing device	Крышка
Type of fastening	Наружный монтаж
Clock hour position, ч	6
Model	Поверхностн. монтажа (открыт. установка)
Connection system	Клемма винтовая
Presence of lock	Без блокировки
Material	Пластик
Number of contacts	2P+PE (однофазн. 3-проводника)
Identification colour	Синий/голубой
Nominal frequency, Гц	50/60
Max. conductor cross section, мм²	2,5...10,0
Military model	Нет
Ambient temperature, °C	-25...40

Fixed socket SSI-123 32A-6h/200-250V 2P+PE IP44 MAGNUM IEK

Основные характеристики

Описание

Основные документы

Особенности конструкции

Технические характеристики

Документация

Паспорта и РЭ

Комплектация

Совместно применяемые изделия

Аналоги