Three-position switch disconnector VRT-63 1P 63A IEK

Product ID:
Main specifications
Switching function | Переключатель на 2 направления |
Nominal rated current, А | 63 |
Number of contacts as change-over contact | 1 |
Number of poles | 1 |
Nominal rated voltage, В | 230 |
Description
PKP cam-type position switches of IEK brand are mechanical devices without internal consumption intended for installation as switching units. PKP can be used as main or group switches for controlling drives based on the single-or three-phase motors, switching with the required control circuits commutation program, alarm, measuring circuits etc. They are applied in AC electric circuits with voltage under 400 V.
Design Features
Specifications
Switching function | Переключатель на 2 направления |
Nominal rated current, А | 63 |
Number of contacts as change-over contact | 1 |
Number of poles | 1 |
Nominal rated voltage, В | 230 |
Voltage type | Переменный (AC) |
Number of contacts as normally open contact | 0 |
Number of contacts as normally closed contact | 0 |
Degree of protection (IP) | IP20 |
Relative air humidity | 50% при 40°С |
Electric wear resistance, циклов | 10000 |
DC voltage per pole, В | 48 |
Rated switching capacity, кА | - |
Max. conductor cross section, мм² | 10 |
Operating temperature range, °C | -25...40 |
Mechanical wear resistance, циклов | 30000 |
Mechanical Execution Group | M1 |
With signal lamp | Нет |
Switch on and off ability, I на Ie | 3 |
Colour calotte | Серый |
Nominal short-term maintained current during 1s Icw , А | 12 |
Mains frequency, Гц | 50 |
Moment of an inhaling of screws of contact clips, нм | 1.2 |
Utility category | АС-22В |
Forced segregation (according to DIN VDE 0113) | Нет |
Burning position | Вертикальное |
Rated surge voltage invariability, кВ | 4 |
Lamptype | Не применимо |
Number of change-over contacts | 1 |
Width in number of modular spacings | 1 |
Angle of possible deviation in operating position, ° | 90 |
Documents
Passports