Three-position switch disconnector VRT-63 3P 25A IEK

Description

Patch cords are switching cords designed for switching the data transmission lines between different sections of switching panels, connecting the active switching or server equipment to the network, as well as for connecting the phones and computers to information sockets. The main characteristic of the cords is their resistance to multiple loads of bending and torsion, which is provided by a multi-wire conductor. The most common and popular types of connectors are RJ45-RJ45.

All ITK patch cords are marked with cable category, number of pairs, type and diameter of conductors, cord length. For ease of installation, reduction of errors in the termination and switching the lines in switchgears, as well as separation of cable lines, depending on the application, the range of ITK patch cords provides different color options.

Design Features

Specifications

Switching functionПереключатель на 2 направления
Nominal rated current, А25
Number of contacts as change-over contact3
Number of poles3
Nominal rated voltage, В400
Voltage typeПеременный (AC)
Number of contacts as normally open contact0
Number of contacts as normally closed contact0
With signal lampНет
Width in number of modular spacings3
Relative air humidity50% при 40°С
Mains frequency, Гц50
Operating temperature range, °C-25...40
Moment of an inhaling of screws of contact clips, нм1.2
Rated surge voltage invariability, кВ4
Degree of protection (IP)IP20
Switch on and off ability, I на Ie3
Colour calotteСерый
Burning positionВертикальное
Forced segregation (according to DIN VDE 0113)Нет
Mechanical wear resistance, циклов30000
Nominal short-term maintained current during 1s Icw , А12
Utility categoryАС-22В
LamptypeНе применимо
Angle of possible deviation in operating position, °90
Number of change-over contacts3
Mechanical Execution GroupM1
Electric wear resistance, циклов10000
DC voltage per pole, В48
Max. conductor cross section, мм²10
Rated switching capacity, кА-

Documents