Three-position switch disconnector VRT-63 1P 32A IEK

Описание

It is intended for control of network voltage parameters (phase alternation, asymmetry, high and low voltage) and transmission of commands to actuators. Control raise, lower, and unbalance voltage, sequence and phase loss. Fixed setpoints.

Особенности конструкции

Технические характеристики

Switching functionПереключатель на 2 направления
Nominal rated current, А32
Number of contacts as change-over contact1
Number of poles1
Nominal rated voltage, В230
Voltage typeПеременный (AC)
Number of contacts as normally open contact0
Number of contacts as normally closed contact0
Moment of an inhaling of screws of contact clips, нм1.2
Utility categoryАС-22В
Electric wear resistance, циклов10000
Burning positionВертикальное
Switch on and off ability, I на Ie3
Mechanical Execution GroupM1
With signal lampНет
Relative air humidity50% при 40°С
DC voltage per pole, В48
Rated surge voltage invariability, кВ4
Colour calotteСерый
Degree of protection (IP)IP20
Forced segregation (according to DIN VDE 0113)Нет
Max. conductor cross section, мм²10
Operating temperature range, °C-25...40
LamptypeНе применимо
Rated switching capacity, кА-
Mechanical wear resistance, циклов30000
Nominal short-term maintained current during 1s Icw , А12
Mains frequency, Гц50
Width in number of modular spacings1
Angle of possible deviation in operating position, °90

Документация