PPNI Gg type links are designed for protecting industrial electric units and cable lines from overloads and short circuit. They are manufactured per rated current from 2 to 630 A.
PPNI fuse links are used for single and three-phase networks having voltage limited to 660 V (50 Hz).
Application area: lead-in and distribution devices; distribution panels and boards; transformer substation equipment; low-voltage boards; control boxes and boards.
Correspond to the requirements EN 60269-1.

Protection of heat release mechanism by plexiglass against change of factory settings.

Silver-containing composite weld deposition increases the wear resistance of the contact group and reduces the contact resistance.

Unified casing with the ability to connect additional devices does not require dismantling, as well as provided with the ability to self-connect.

The status indicator of the main circuit provides accurate information on the status of contacts regardless of handle position.

Increased size of the screw head with multiple-purpose slot (+, -) facilitates the assembly and prevents the falling out of screws during installation.

The improved switch handle of wider size with increased contact area facilitates the switching process.

The switch design provides for two types of protection against overload and short circuit, that significantly improves the protection of distribution and group circuits.

Notches on the contact clamps reduce heat loss and increase the mechanical stability of the connection.

Special casing design with increased heat transfer allows you to raise the loading capacity by 10%.

Bus connection to the automatic circuit breaker allows to reduce the contact resistance and provides a 2- or 3-wire connection of the line for uniform distribution of bus load.

Miniature circuit breaker (MCB)

Nominal rated current

Nominal rated voltage

Release characteristic

Rated short-circuit breaking capacity EN 60898

Number of poles

Voltage type

Range of use

Number of poles (total)

Release actuating time in short-circuit tm zone

Explosion protection

Rated short-circuit breaking capacity Icn EN 60898 at 230 V

Switch off technique

Current limiting class

Power poles quantity

Mounting method

Max. cross section incoming cable

Frequency

Built-in depth

Electronic release

Additional equipment possible

Type of electric connection

Number of protected poles

Electromagnetic release

Power loss

Degree of protection (IP)

Mounting rail type

Nominal voltage DC

Width in number of modular spacings

Rated short-circuit breaking capacity Icn EN 60898 at 400 V

Thermal release

Residual release

Ambient class

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Circuit breaker BA47-29M 1P 5A 4.5kA C IEK

Light signaling indicators are intended for indicating the state of electric circuits.
They are applied in electric panels, industrial equipment and power supply objects.

Various color variants provide for the most efficient arrangement of panels and boards.

Protection of the mechanism of the thermal release with a plexiglass insert from changing factory settings.

notes on contact clamps reduce heat losses and increase the mechanical stability of the connection.

the possibility of simultaneous connection of the FORK tire and a flexible conductor for distributing the power supply through the upper clamps, as well as the possibility of connecting the PIN bus.

The attack from the silver -containing composite increases the wear resistance of the contact group and reduces the transition resistance.

an improved arcaming system: increased service life, increased resistance to short -circuit currents: patent No. RU 139886.

Additional protection against the burning of the circuit of the circuit breaker and heat removal due to plastic and metal anti -agricultural plates.

Fast installation and additional reliability of mounting on a DIN-rake using a latch with a double fixed position.

The presence of the contact position indicator.

The increased strength of the body in the attachment zone of conductors due to two additional rivets and a monolithic front panel.

Nominal rated current, А	5.0
Nominal rated voltage, В	230
Release characteristic	C
Rated short-circuit breaking capacity EN 60898, кА	4,5
Number of poles	1

Nominal rated current, А	5.0
Nominal rated voltage, В	230
Release characteristic	C
Rated short-circuit breaking capacity EN 60898, кА	4,5
Number of poles	1
Voltage type	Перемен./постоян. (AC/DC)
Range of use	Промышленное и бытовое
Current limiting class	3
Width in number of modular spacings	1
Rated short-circuit breaking capacity Icn EN 60898 at 400 V, кА	4.5
Electromagnetic release	Да
Mounting rail type	35x7.5
Mounting method	на DIN-рейку
Number of poles (total)	1
Number of protected poles	1
Ambient class	УХЛ4
Frequency, Гц	50
Residual release	Нет
Rated short-circuit breaking capacity Icn EN 60898 at 230 V, кА	4.5
Rated surge voltage invariability, кВ	4
Built-in depth, мм	73,6
Max. cross section incoming cable, мм²	25
Type of electric connection	Винтовое соединение
Degree of protection (IP)	IP20
Switch off technique	Тепловой, электромагнитный
Explosion protection	Без взрывозащиты
Thermal release	Да
Additional equipment possible	Да
Nominal voltage DC, В	≤ 48
Suitable for motor safety switch	Да
Electronic release	Нет
Power poles quantity	1
Power loss, Вт	3.0
Release actuating time in short-circuit tm zone, с	0,1

Miniature circuit breaker VA47-29 1P 5A 4,5kA C IEK

Основные характеристики

Описание

Основные документы

Особенности конструкции

Технические характеристики

Документация

Паспорта и РЭ

Совместно применяемые изделия