PPNI Gg type links are designed for protecting industrial electric units and cable lines from overloads and short circuit. They are manufactured per rated current from 2 to 630 A.
PPNI fuse links are used for single and three-phase networks having voltage limited to 660 V (50 Hz).
Application area: lead-in and distribution devices; distribution panels and boards; transformer substation equipment; low-voltage boards; control boxes and boards.
Correspond to the requirements EN 60269-1.

Protection of heat release mechanism by plexiglass against change of factory settings.

Silver-containing composite weld deposition increases the wear resistance of the contact group and reduces the contact resistance.

Unified casing with the ability to connect additional devices does not require dismantling, as well as provided with the ability to self-connect.

The status indicator of the main circuit provides accurate information on the status of contacts regardless of handle position.

The improved switch handle of wider size with increased contact area facilitates the switching process.

Increased size of the screw head with multiple-purpose slot (+, -) facilitates the assembly and prevents the falling out of screws during installation.

The switch design provides for two types of protection against overload and short circuit, that significantly improves the protection of distribution and group circuits.

Notches on the contact clamps reduce heat loss and increase the mechanical stability of the connection.

Special casing design with increased heat transfer allows you to raise the loading capacity by 10%.

Bus connection to the automatic circuit breaker allows to reduce the contact resistance and provides a 2- or 3-wire connection of the line for uniform distribution of bus load.

Miniature circuit breaker (MCB)

Nominal rated current

Nominal rated voltage

Release characteristic

Rated short-circuit breaking capacity EN 60898

Number of poles

Voltage type

Range of use

Power poles quantity

Frequency

Residual release

Built-in depth

Rated short-circuit breaking capacity Icn EN 60898 at 230 V

Width in number of modular spacings

Switch off technique

Degree of protection (IP)

Release actuating time in short-circuit tm zone

Number of poles (total)

Thermal release

Additional equipment possible

Mounting method

Current limiting class

Nominal voltage DC

Number of protected poles

Type of electric connection

Rated short-circuit breaking capacity Icn EN 60898 at 400 V

Ambient class

Electromagnetic release

Mounting rail type

Power loss

Explosion protection

Max. cross section incoming cable

Electronic release

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Circuit breaker BA47-29M 3P 5A 4.5kA C IEK

PSttbe-1 heat-shrink sleeve is designed for connection of aluminum or copper conductors of cables with plastic, rubber and polyethylene insulation with armor or shield for voltage 1 kV: AVBbShv-1, VBbShv-1, AVVB-1, AVVBG-1, VVB-1, VVBG-1, APvBbShv-1, PvBbShv-1, VVGE, AVVGE, PvVGE, APvVGE, their equivalents and versions.
The sleeves can be installed under ground (directly in the ground, in tunnels and channels) and outdoors (on trestles, cable trays, etc).

Protection of the mechanism of the thermal release with a plexiglass insert from changing factory settings.

notes on contact clamps reduce heat losses and increase the mechanical stability of the connection.

the possibility of simultaneous connection of the FORK tire and a flexible conductor for distributing the power supply through the upper clamps, as well as the possibility of connecting the PIN bus.

The attack from the silver -containing composite increases the wear resistance of the contact group and reduces the transition resistance.

an improved arcaming system: increased service life, increased resistance to short -circuit currents: patent No. RU 139886.

Additional protection against the burning of the circuit of the circuit breaker and heat removal due to plastic and metal anti -carbon plates.

Fast installation and additional reliability of mounting on a DIN-rake using a latch with a double fixed position.

The presence of the contact position indicator.

The increased strength of the case in the attachment zone of conductors due to two additional rivets and a monolithic front panel.

Nominal rated current, А	5.0
Nominal rated voltage, В	400
Release characteristic	C
Rated short-circuit breaking capacity EN 60898, кА	4,5
Number of poles	3

Nominal rated current, А	5.0
Nominal rated voltage, В	400
Release characteristic	C
Rated short-circuit breaking capacity EN 60898, кА	4,5
Number of poles	3
Voltage type	Перемен./постоян. (AC/DC)
Range of use	Промышленное и бытовое
Current limiting class	3
Switch off technique	Тепловой, электромагнитный
Suitable for motor safety switch	Да
Release actuating time in short-circuit tm zone, с	0,1
Ambient class	УХЛ4
Rated short-circuit breaking capacity Icn EN 60898 at 230 V, кА	4.5
Power loss, Вт	9.0
Electromagnetic release	Да
Rated surge voltage invariability, кВ	4
Degree of protection (IP)	IP20
Type of electric connection	Винтовое соединение
Frequency, Гц	50
Width in number of modular spacings	3
Nominal voltage DC, В	≤ 48
Mounting method	на DIN-рейку
Residual release	Нет
Explosion protection	Без взрывозащиты
Electronic release	Нет
Number of protected poles	3
Rated short-circuit breaking capacity Icn EN 60898 at 400 V, кА	4.5
Additional equipment possible	Да
Max. cross section incoming cable, мм²	25
Thermal release	Да
Number of poles (total)	3
Built-in depth, мм	73,6
Power poles quantity	3
Mounting rail type	35x7.5

Miniature circuit breaker VA47-29 3P 5A 4,5kA C IEK

Основные характеристики

Описание

Основные документы

Особенности конструкции

Технические характеристики

Документация

Паспорта и РЭ

Совместно применяемые изделия