ITK adapter cat.6 UTP type RJ45-RJ45
Product ID:
Main specifications
| Connection 1 | Прочее |
| Connection type connection 1 | Вилка/штекер |
| Connection 2 | Прочее |
| Connection type connection 2 | Вилка/штекер |
| Cable length, м | 0.00 |
Advantages
- Support for the SPODES protocol according to GOST R 58940-2020.
- Compliance with industry requirements, including Decree of the Government of the Russian Federation of June 19, 2020 N 890 "On the procedure for providing access to the minimum set of functions of intelligent metering systems for electrical energy (power)".
- Measurement of network parameters in real time:
- - active and reactive electricity;
- - active power for each phase and the total value in two directions;
- - reactive power for each phase and the total value in two directions;
- - total power for each phase and the total value in two directions;
- - time-averaged power factor (cos φ);
- - phase voltage for each phase and linear;
- - current in each phase;
- - current in the neutral wire;
- - network frequency;
- - imbalance of currents in the phase and neutral wires.
- The data update interval for each measured parameter is no more than 0.5 s.
- The error in measuring the parameters of the quality of electrical energy must correspond to class S or higher in accordance with GOST 30804.4.30-2013.
- Frequency deviation (with specification in terms of the frequency measurement range from 47.5 to 52.5 Hz).
- Possibility to configure the following settings:
- - current date, time, calendar of weekends and holidays;
- - start date of the billing period;
- - number of effective tariffs and tariff schedule;
- - composition and sequence of displaying messages and measured parameters on the display;
- - threshold values for fixing power supply quality violations;
- - operation parameters of built-in switching devices;
- - changing passwords and access control;
- - transformation ratios for semi-indirect switching devices.
- The ability to record the following events in the form of an event log generated in the internal non-volatile memory of the device:
- - the fact of a change in the state of the device case opening contact;
- - the fact of changing the state of the contact of the terminal cover (covers);
- - access attempts in violation of access control rules;
- - access attempts with unsuccessful identification and (or) authentication;
- - attempts of unauthorized violation of software integrity;
- - the fact of changing the device settings;
- - the fact of the impact of a magnetic field with a value of the modulus of the magnetic induction vector over 150 mT;
- - the fact of voltage deviation in the measuring circuits from the specified limits;
- - the fact of absence or low voltage for each phase in the presence of current in the measuring circuits with configurable thresholds;
- - the fact of the absence of voltage or the voltage value below the programmed threshold for each phase with the fixation of the time of loss and restoration of voltage;
- - the fact of phase inversion or violation of the phase sequence;
- - the fact of exceeding the ratio of the specified values of consumption of active and reactive power (cos φ);
- - the fact of exceeding the specified power limit;
- - the fact of changing the direction of energy (power) flow;
- - the fact and reason for switching on and off the built-in switching device;
- - the fact of a successful or unsuccessful self-diagnosis procedure;
- ...
Design Features
Specifications
| Connection 1 | Прочее |
| Connection type connection 1 | Вилка/штекер |
| Connection 2 | Прочее |
| Connection type connection 2 | Вилка/штекер |
| Cable length, м | 0.00 |
| Screened | Нет |
| With terminal resistor | Нет |
| Category | 6 |
| Max. amperage, А | 1.5 |
| Voltage, В | 48 |
| Material housing | Пластик |
| Ambient temperature, °C | 0...70 |
| Colour | Белый |
| Display | UTP |
| Material of contacts | Бронза с позолотой |