Voltage Stabilizer SNI3-15 kVA 3-phase IEK

Description

AMG series bushings provide for carrying out interconnection of aluminum conductors using wrenches (no need for a crimping tool). For connecting a SSIC wire, the bushing shall be used in places of double anchor clamping on the wire section not subject to mechanical stress. Internal surface is covered with a special paste boosting the contact joint conductivity as well as protecting this surface from thin oxide film. Cross knurl and correspondent bolts enhance mechanical and electrical characteristics of the junction point. These caps can be applied for both single and multi-wire, round and sector conductors.

Design Features

Specifications

Primary voltage, В160
Rated power, ВА15000
Max. input current AC 50 Hz, А3х22,5
ModelНапольное устройство
Stabilization type Электромеханический
Secondary voltage, В220
Number of phasesТрехфазный + N (4 проводника)
Bypass (bypass mode)Нет
Suitable for wall mountingНет
Rated exit. line voltage, В380
Ambient classУХЛ4
Maximum allowable. entrance. line voltage, В235...475
Temperature protectionДа
Rated exit. phase voltage, В-
Time of reaction, мс<1000
Actuation voltage of protection against increased output voltage Umax, В246±4
Weight, кг79
Working entrance. line voltage, В280...430
Working entrance. phase voltage, В-
Maximum allowable. entrance. phase voltage, В-
Width, мм438
Suitable for surface mountingНет
Degree of protection (IP)IP20
Stabilization Accuracy + or -, процентов3
Actuation voltage of protection against decreased output voltage Umin, В184±4
Height, мм793
Operating input voltage range, В160...250/280...430
Depth, мм390

Documents

Set contains

  • Стабилизатор - 1 шт;

  • Руководство по эксплуатации. Паспорт - 1 экз;

  • Запасные щетки автотрансформатора - 3 шт;

  • Упаковочная коробка - 1 шт.