Корпус металлический - 1 шт.
Болт фланцевый М6х14 - 4 шт.
Гайка фланцевая М6 - 6 шт.
Зацеп - 4 шт.
Втулка - 4 шт. 
Провод заземления - 1 шт.
Ключ - 1 шт.
Знак "Заземление" - 2 шт.
Знак "Осторожно! Электрическое напряжение" - 1 шт.
Паспорт - 1 экз.
Инструкция по монтажу - 1 экз.

Конфигуратор ЩМП TITAN IEK

The Z-shaped section is designed to bypass obstacles in the way of laying the busbar trunking in a vertical or horizontal plane

Copper ground studs with a larger pad for better contact eliminate the possibility of them breaking off and increase the level of electrical safety of the case.

Mounting plate with 4 perimeter folds - increased panel rigidity.

Screening the mounting plate reduces equipment installation time.

Priming before painting - maximum protection against corrosion.

Door fixation to prevent pressure on the seal during transport and storage.

Three-point locking of the door with one turn of the key (for cabinets from 500 mm high).

Vertical Z-profiles on the inside of the door - to fix the cable harness when installing equipment, increase the rigidity of the door.

New type of hinges with single point fastening to the shell - quick reattachment and IP66 degree of protection.

Protection of process openings with plastic plugs to protect against moisture and dust.

Double forging along the perimeter of the shell and door increases the rigidity of the structure, preserves the geometry of the body.

Removable cable flange facilitates installation of any type of glands and glands.

Empty cabinet

Height

Width

Depth

Degree of protection (IP)

Ambient class

Primary current

RAL-number

Material housing

Suitable for outdoor use

Type of cover

Max static load per door/shell

Presence of lock in door

Weight

Surface Billing

Number of modules

Type of door

Colour

With mounting plate

With lock

Cover model

Plate thickness cabinet

Ambient temperature

Rated current (In)

Surface protection

Cable entry

Metal thickness

Mounting method

Transparent cover/door

Plate thickness door/cover

Type of installation

Extension possible

Built-in depth

Инструкция по монтажу щитов с монтажной панелью (ЩМП)

TITAN 5 Корпус металлический ЩМП IP66. Краткое руководство по эксплуатации

Паспорта и РЭ

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

TITAN 5 Metal housing ShMP-120.60.30 UHL1 IP66 IEK

ЩМП TITAN Новая линия

IEK TITAN

TITAN Автоматическая линия окраски

TITAN Испытания на IPх6

TITAN Статическая нагрузка на корпус ЩМП TITAN 5

The Z-shaped combined section is designed to change the conditional direction of the busbar in two planes at once - vertical and horizontal, as well as in cases where it is impossible to use two standard corner elements when laying the busbar route

Copper ground studs with a larger pad for better contact eliminate the possibility of their separation and increase the level of electrical safety of the case.

Locking the door to prevent pressure on the seal during transport and storage.

Removable cable flange facilitates the installation of glands and cable glands of any type.

TITAN 5 Metal housing ShMP-120.60.40 UHL1 IP66 IEK

The direct transposition section is designed to change the position of conductors (phases) on the busbar route

Copper ground studs with a larger pad for better contact prevent breakage and improve chassis electrical safety.

Fixing the door to prevent pressure on the seal during transport and storage.

TITAN 5 Metal housing SCHMP-120.80.30 UHL1 IP66 IEK

The flange section is intended for connecting the busbar to the low-voltage switchgear, transformer or cable line

Copper ground studs with a larger pad for better contact eliminate the possibility of them breaking off and increase the electrical safety level of the case.

TITAN 5 Metal housing ShMP-120.80.40 UHL1 IP66 IEK

Корпус металлический - 1 шт.
Монтажная панель - 1 шт.
Метизы для установки.
Провод заземления - 1 шт.
Знак "Опасность поражения электрическим током" - 1 шт.
Знак "Заземление" - 3 шт.
Инструкция по установке - 1 экз.
Паспорт - 1 экз.

Метизы для установки, провод для заземления, знаки электробезопасности

Конфигуратор металлических оболочек IEK 

Optical crosses are designed for switching the optical signals either from trunk lines or for distributing these signals over small server and office optical networks. They can be wall mounted or 19” version.

Protective shield and protective gutter on the casings provide a degree of protection of IP54 of electrical protection against moisture.

Welded casing, fully welded joints, full sealness of the board.

When installing the dustproof moistureproof fittings with the possibility of sealing, a IP65 degree of protection is achieved.

Increased useful area of galvanized mounting panel, a perforation to install cable ties.

Reinforced hinges in both versions. Protective cap is provided.

The SCHMP PRO Series mounting board characteristically exhibits by its faceted corners.

The angle piece allows you to adjust the depth of installation of face solid panels and face panels for modular automatic circuit breakers.

The version of IP54 provides a polyurethane foam seal on the door perimeter.

Possibility to install metal vanity panel (face solid panels and face panels for modular automatic circuit breakers).

3 hinges for reinforcing the door of SCHMP PRO mounting board of the size above “3”.
3 locks for closer fit of SCHMP PRO mounting boards of the size above “5”.

Removable cable inlets providing easy access to the equipment during installation.

Door opening angle

Number of inlets

PRO Metal housing ShchMP-6-2 (1200x650x285mm) U1 IP54 (replacement article YKM40-06-54; TI5-10-N-120-060-030-66) IEK

Корпус металлический - 1 шт.
Монтажная панель - 1 шт.
Метизы для установки.
Провод заземления - 1 шт.
Знак "Опасность поражения электрическим током" - 1 шт.
Знак "Заземление" - 2 шт.
Инструкция по установке - 1 экз.
Паспорт - 1 экз.

Adjustment of the mounting panel in depth is performed thanks to the perforation of the angle welded to the bottom of the casing.

Dustproof and moistureproof fittings on the lock in order to ensure the degree of protection of IP65.

Forging on the perimeter of the door opening to enhance the rigidity.

Profile for installation of signalling equipment.
High-quality seal made of polyurethane foam on the door perimeter.

Reinforced hinges. Protective cap is provided.

Possibility to install metal vanity panel (face solid panels and face panels for modular automatic circuit breakers) at different depth.

Advanced shield which serves as a protection against dirt and water when the door is opened.

Height, мм	1200
Width, мм	650
Depth, мм	275
Degree of protection (IP)	IP65
Ambient class	У1
Primary current, А	630
RAL-number	7035
Type of installation	Навесной
Suitable for outdoor use	Да
Plate thickness cabinet, мм	1.4
Built-in depth, мм	-
Type of cover	Закрытого типа (закрывающаяся)
Material housing	Сталь
Surface protection	Порошковая окраска
Presence of lock in door	Да
Door opening angle, °	105
Number of inlets	3
Metal thickness, мм	1,4
Extension possible	Нет
Weight, кг	42,3
Cover model	Закрытого типа (закрывающаяся)
Plate thickness door/cover, мм	1,4
Type of door	Одинарный/единичный
Surface Billing	Шагрень
Number of modules	-
With mounting plate	Да
Mounting method	EV000945
Cable entry	Снизу

GARANT Metal housing ShchMP-6-0 (1200x650x275mm) U1 IP65 (replacement article TI5-10-N-120-060-030-66; TI5-10-N-120-080-030-66) IEK

Main specifications

Analogs

Basic documents

Design Features

Specifications

Documents

Set contains

Compatible Products