V_REESTRE_MINPROMTORGA_osnovnoy_variant_dlya_vsekh_fonov.png

Корпус металлический - 1 шт.
Болт фланцевый М6х14 - 4 шт.
Гайка фланцевая М6 - 6 шт.
Зацеп - 4 шт.
Втулка - 4 шт. 
Провод заземления - 1 шт.
Ключ - 1 шт.
Знак "Заземление" - 2 шт.
Знак "Осторожно! Электрическое напряжение" - 1 шт.
Паспорт - 1 экз.
Инструкция по монтажу - 1 экз.

Конфигуратор ЩМП TITAN IEK

Perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protecting power and low-current cables. When used in conjunction with a cover, it provides maximum cable protection from external influences, dust and moisture. Depending on the design, the trays can be used both inside public, industrial buildings, structures and retail facilities, and outdoors under a canopy, in the open air, as well as in rooms with high humidity.
Rolling perforated trays IEK are made from cold-rolled steel coils, galvanized by a conveyor method in accordance with GOST 14918-80 or by immersing finished products in molten zinc GOST 9.307.
The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of different sizes.
The perforated tray is produced according to TU 27.33.13-002-83135016-2017. According to safety requirements, the product complies with GOST R 52868-2021.

Priming before painting - maximum protection against corrosion.

Fixing the door to prevent pressure on the seal during transportation and storage.

Mounting panel with 4 folds around the perimeter - increased panel rigidity.

The removable cable flange facilitates the installation of glands and cable glands of any type.

Three-point door locking with one turn of the key (for housings with a height of 500 mm).

Copper grounding studs with an enlarged area for better contact eliminate the possibility of their tearing off and increase the level of electrical safety of the housing.

Double forging along the perimeter of the shell and door increases the rigidity of the structure and preserves the geometry of the body.

Vertical Z-profiles on the inside of the door - for fixing the cable harness when installing equipment, increase the rigidity of the door.

Marking the mounting panel reduces equipment installation time.

New type of hinges with fastening to the shell at one point - quick re-hanging and providing IP66 protection degree.

Protection of technological openings with plastic plugs to protect against moisture and dust.

Empty cabinet

Height

Width

Depth

Degree of protection (IP)

Ambient class

Primary current

RAL-number

Cable entry

Plate thickness door/cover

Type of door

Type of installation

With mounting plate

Extension possible

Material housing

Metal thickness

Number of modules

Suitable for outdoor use

Max static load per door/shell

Surface Billing

Colour

With lock

Presence of lock in door

Built-in depth

Cover model

Rated current (In)

Mounting method

Plate thickness cabinet

Weight

Ambient temperature

Transparent cover/door

Surface protection

Type of cover

Руководство по монтажу щитов с монтажной панелью (ЩМП)

TITAN 5 Корпус металлический ЩМП IP66. Краткое руководство по эксплуатации

Паспорта и РЭ

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

TITAN 5 Metal housing ShMP-70.50.20 UHL1 IP66 RAL3020 red IEK

ЩМП TITAN Новая линия

TITAN Статическая нагрузка на корпус ЩМП TITAN 5

IEK TITAN

TITAN Автоматическая линия окраски

TITAN Испытания на IPх6

Распаковка корпуса ЩМП TITAN 5

Корпус металлический - 1 шт.
Болт фланцевый М6х14 - 4 шт.
Гайка фланцевая М6 - 6 шт.
Зацеп - 4 шт.
Втулка - 4 шт. 
Провод заземления - 1 шт.
Шайба 6.01.019 - 2 шт.
Ключ - 1 шт.
Накладка на замок - 1 шт.
Знак "Заземление" - 2 шт.
Знак "Осторожно! Электрическое напряжение" - 1 шт.
Паспорт - 1 экз.
Инструкция по монтажу - 1 экз.

Additional door rigidity due to removable U-profile.

Three-point locking of the door with one turn of the key (for cabinet heights from 500 mm).

Mounting plate with 4 perimeter folds - increased panel rigidity.

Dust and moisture-proof rim lock with a plug to prevent dust and moisture from entering the cylinder.

Removable cable flange facilitates installation of any type of glands and glands.

Priming before painting - maximum corrosion protection.

Copper ground studs with a larger pad for better contact eliminate the possibility of them breaking off and increase the level of electrical safety of the case.

Double forging along the perimeter of the shell and door increases the rigidity of the structure, preserves the geometry of the body.

Screening the mounting plate reduces equipment installation time.

New type of hinges with single point fastening to the shell - quick reattachment and IP66 rating.

Protection of process openings with plastic plugs to protect against moisture and dust.

Locking the door to prevent pressure on the seal during transport and storage.

Impact strength

TITAN 7 Корпус металлический ЩМП IP66. Краткое руководство по эксплуатации

TITAN 7 Metal housing ShMP-70.50.20 UHL1 IP66 IEK

Корпус металлический - 1 шт.
Монтажная панель - 1 шт.
Метизы для установки.
Провод заземления - 1 шт.
Знак "Опасность поражения электрическим током" - 1 шт.
Знак "Заземление" - 2 шт.
Инструкция по установке - 1 экз.
Паспорт - 1 экз.

ITK vertical cable organizers are used for vertical organization of cable and cable bundles in cabinets and racks, provide support and fixation of main cable lines, their descent or ascent within the entire height of the cabinet, guarantee the necessary bending radius when bringing cables to the equipment. Vertical organizers-holders also serve as a base for fixing cable brackets and rings.

Vertical cable organizers are attached to the horizontal side slats and racks inside the cabinet, as well as to the vertical mounting profiles so as not to involve the useful mounting height of the cabinet. Installation is carried out using the screw-washer-nut fastener.

Vertical cable organizers are represented by two main types: open organizer-holder, which has a different configuration of holes and windows and closed vertical organizer type cable channel with a lid. The altitude of the organizers: 33 to 47U. Material: sheet steel. The package includes an organizer and a set of fasteners.

Profile for installation of signalling equipment.
High-quality seal made of polyurethane foam on the door perimeter.

Advanced shield which serves as a protection against dirt and water when the door is opened.

Adjustment of the mounting panel in depth is performed thanks to the perforation of the angle welded to the bottom of the casing.

Possibility to install metal vanity panel (face solid panels and face panels for modular automatic circuit breakers) at different depth.

Increased useful area of galvanized mounting panel, a perforation to install cable ties.

Forging on the perimeter of the door opening to enhance the rigidity.

Dustproof and moistureproof fittings on the lock in order to ensure the degree of protection of IP65.

Reinforced hinges. Protective cap is provided.

Door opening angle

Number of inlets

GARANT Metal housing ShchMP-3-0 (650x500x220mm) U1 IP65 (replacement article TI5-10-N-060-050-020-66; TI5-10-N-060-050-025-66; TI5-10 -N-070-050-020-66) IEK

The Z-shaped section is designed to bypass obstacles in the path of busbar trunking in a vertical or horizontal plane

Removable cable flange facilitates the installation of glands and glands of any type.

Vertical Z-profiles on the inside of the door - to fix the cable harness when installing equipment, increase the rigidity of the door.

Height, мм	700
Width, мм	500
Depth, мм	200
Degree of protection (IP)	IP66
Ambient class	УХЛ1

Height, мм	700
Width, мм	500
Depth, мм	200
Degree of protection (IP)	IP66
Ambient class	УХЛ1
Primary current, А	630
RAL-number	7035
Type of installation	Навесной
Suitable for outdoor use	Да
Plate thickness cabinet, мм	1.0
Ambient temperature, °C	-60...40
Extension possible	Нет
Metal thickness, мм	1
Colour	Серый
Suitable for outdoor use	Да
Max static load per door/shell, Н	200 / 1150
Number of modules	-
Cover model	Закрытого типа (закрывающаяся)
Cable entry	Снизу
Rated current (In), А	630
Weight, кг	21,77
Type of door	Одинарный/единичный
Surface protection	Порошковая окраска
Transparent cover/door	Нет
Built-in depth, мм	-
Type of cover	Закрытого типа (закрывающаяся)
With mounting plate	Да
Mounting method	Поверхностного монтажа
Plate thickness door/cover, мм	1,0
With lock	Да
Material housing	Сталь
Surface Billing	Шагрень
Presence of lock in door	Да

TITAN 5 Metal housing ShMP-70.50.20 UHL1 IP66 IEK

Основные характеристики

Описание

Основные документы

Особенности конструкции

Технические характеристики

Документация

Паспорта и РЭ

Комплектация

Совместно применяемые изделия

Аналоги