Optical crosses are designed for switching the optical signals either from trunk lines or for distributing these signals over small server and office optical networks. They can be wall mounted or 19” version.

Vertical location of the casing provides easy installation and extra air circulation.

Precise alignment and secure installation of the casing on the wall provide points of fastening with the indication of dimensions between them.

Simple insertion of cables, wires through the stamped inlets for conductors on the rear and side walls of the casing. 

Multi-purpose anodized screws are protected against corrosion and are suitable for any type of screwdriver.

No need to write on breakers - a special marking tape is included in the standard scope of supply.

Small distribution board

Mounting method

Width in number of modular spacings

Number of rows

Colour

Degree of protection (IP)

Height

Width

Depth

RAL-number

Material housing

Built-in depth

EMC-version

With mounting plate

Cover model

Extension possible

Type of cover

With transparent cover

DIN-rail

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Surface plastic empty enclosure SCHRN-P-18 modules IP41 LIGHT IEK

Паспорт - 1 шт.
Суппорт для шин - 1 шт.
DIN-рейка - 1 шт.
Шина 6х9мм, 8 отв. - 1 шт.
Шина 6х9мм, 10 отв. - 1 шт.
Лента маркировочная - 1 шт.
Комплект метизов - 1 шт.

Precise alignment and secure installation of the housing on the wall are provided by mounting points with indication of dimensions between them.

The complete set of housings ensures simple and quick installation.

Easy insertion of cables and wires through stamped conductor entries on the rear and side walls of the housing.

The zero bus is mounted on a special panel. It can be easily removed and installed on the opposite side.

KREPTA 3 Wall-mounting plastic distribution enclosure 18 modules IP41 black

Fully equipped casing provide simple and quick installation.

Zero bus is mounted on a special panel. It can be easily removed and installed on the opposite side. It provides high security: the live parts are closed to prevent the intentional touching. Self-extinguishes at a temperature of 950°C.

KREPTA 3 Корпус модульный пластиковый навесной ЩРН-П IP41. Краткое руководство по эксплуатации

Паспорта и РЭ

KREPTA 3 Plastic enclosure ShchRN-P-18 IP41 pine IEK

Винты, пластиковые дюбели, заглушки

Суппорт для установки клеммников, клеммники нейтрали и заземления

Wall cabinets LINEA W are used for compact placement of not heavy 19" switching equipment and crosses and are meant for local networks deployed in limited space. In addition to the compactness, ease of placement and maintenance cabinets LINEA W have an aesthetic external appearance and do not spoil the overall design and decoration of the premises. 

The construction of wall cabinets LINEA W is prefabricated demountable, consists of two side frames, roof, base, front door, side and rear walls, side horizontal bars and two pairs of vertical mounting profiles with height marking in units. Also included in the package are: dowels and screws for suspension and wall mounting, adjustable legs, cable holders. 

The front door, depending on the modification can be solid metal, panoramic, made of tempered tinted glass, or perforated. The door is hung on both the left and right sides; the opening angle of the door exceeds 180 degrees. Side panels are equipped with a point lock and latches. All conductive parts of the cabinet have grounded studs.

KREPTA 3 Flush-mounting plastic distribution enclosure 18 modules IP41 white

KREPTA 3 Plastic enclosure ShchRN-P-18 IP41 black door black IEK

The fluorescent lamps are used in outdoor and indoor luminaires for industrial, social and household facilities. The fluorescent lamps comply with requirements of Customs Union Technical Regulation TR TS 004/2011, IEC 60081, IEC 61195 and Russian Federation Government Decree No.602 of 20.07.2011.

For ease of use, the cabinet is provided with a reversal of the door opening direction. When lightly pressed, the door is removed from the latches and installed on the other side.

To protect against unauthorized entry and access to the contact group, a hole for sealing is provided.

Handy plastic lock. It is possible to replace the plastic lock with a metal one.

The housing is sealed with a special gasket and additional glands.

Ease of installation and cable routing: large distance between the DIN rail and the rear wall of the case (from 20 to 35 mm), the distance between DIN rails from 125 to 130 mm.

Possibility of mounting an additional stepped holder for N and PE busbars.

Captive screws for 1/4 turn quick fixing. This allows you to significantly reduce installation time.

KMPn 2/18 IP55 hinged plastic housing for 18 modular vending machines. off

Шины N и PE с держателем и крышкой

Заглушки модульные и заглушки отверстий

Петли для навески дверцы

Замок с трехгранным ключом

Filter fans are meant for air cooling of active equipment inside electrical cabinets. The generated airflow prevents the formation of highly heated areas and protects electrical components from overheating. The presence of a removable filter prevents the penetration of dust and moisture inside the cabinet, allows you to provide a degree of protection not lower than IP54. By installation in conjunction with the thermostat is used to ensure optimal climatic conditions inside the cabinet and the organization of stable operation of the installed equipment.
It is highly resistant to atmospheric and temperature influences, as well as UV radiation. It can be used in electrical equipment of alternating current with frequency of 50 Hz and voltage up to 230 V. The progressive system of air supply makes the fan extremely silent while maintaining ease of maintenance and installation. The air direction can be easily changed by reversing the axial fan.

Convenient and accurate installation of the casing is possible due to the special marking of fixing holes for mounting of the casing on the wall.

Easy and fast installation of glands for a variety of cross sections is possible due to break-out holes of different diameters, which are located on the top and bottom of the casing.

Larger distance between the DIN-rail and back wall.
The DIN-rail is adjustable in depth, plastic tabs are used to install it.

Protection of casing against unauthorized access is provided by a triangular key lock.

The direction of opening the front panel can be easily changed both to right and left at the place of installation due to the presence of plastic hinges.

Removable holder of N and PE buses can be installed on the top and bottom of the casing onto the special fastening elements. N and PE bus are installed on a removable holder by means of simple latching in the seats.

KREPTA 7 Wall-mounting plastic distribution enclosure 16 modules IP66

Паспорт - 1 шт.
Суппорт для шин - 1 шт.
DIN-рейка - 1 шт.
Держатель DIN-рейки - 2 шт.
Шина 6х9мм, 10 отв. - 2 шт.
Лента маркировочная - 1 шт.
Комплект метизов - 1 шт.

Паспорт - 1 шт.
Суппорт для шин - 1 шт.
DIN-рейка - 1 шт.
Держатель DIN-рейки - 2 шт.
Шина 6х9мм, 10 отв. - 2 шт.
Ампула уровня - 1 шт.
Вставка для ввода труб - 1 шт.
Лента маркировочная - 1 шт.
Комплект метизов - 1 шт.

Applied for screw connection of conductors, protecting wires from damage and excluding possibility of short circuit to the frame of electric unit. Insulation frame is made of white non-flammable polystyrene or transparent polyethylene. Terminal block and screws - latten alloy.

Possibility of sealing the housing using a plastic screw.

Possibility of inserting cable ducts and pipes of various diameters into the housing using a special insert.

Safety snap-on N/PE tire support protects against contact

Easy installation due to the absence of side walls on the base of the body in wall-mounted models.

Adjusting the DIN rail height using special brackets

Number of doors

PRIME Wall-mounting plastic distribution enclosure 18 modules IP41 white

The cable markers of MKN series can be placed during installation of wiring, also after conductor termination and connection. Provided grooves allow for use of long letterings for wire markings. The MKN cable markers during operation can withstand temperatures within range from minus 30 to plus 70°C. The MKN cable markers must be installed at temperatures within operating range from minus 10±2°C to plus 50±2°C.

Mounting method	Поверхностного монтажа
Width in number of modular spacings	18
Number of rows	1
Colour	Белый
Degree of protection (IP)	IP41
Height, мм	220.0
Width, мм	362.0
Depth, мм	97.0
RAL-number	9016
Material housing	ABS пластик
With mounting plate	Нет
DIN-rail	Да
Type of cover	Закрытого типа (закрывающаяся)
Cover model	Закрытого типа (закрывающаяся)
Extension possible	Нет
EMC-version	Нет
With transparent cover	Да
Built-in depth, мм	-

KREPTA 3 Wall-mounting plastic distribution enclosure 18 modules IP41 white

Main specifications

Description

Basic documents

Design Features

Specifications

Documents

Set contains

Compatible Products

Analogs