PSttbe-1 heat-shrink sleeve is designed for connection of aluminum or copper conductors of cables with plastic, rubber and polyethylene insulation with armor or shield for voltage 1 kV: AVBbShv-1, VBbShv-1, AVVB-1, AVVBG-1, VVB-1, VVBG-1, APvBbShv-1, PvBbShv-1, VVGE, AVVGE, PvVGE, APvVGE, their equivalents and versions.
The sleeves can be installed under ground (directly in the ground, in tunnels and channels) and outdoors (on trestles, cable trays, etc).

Multi-purpose anodized screws are protected against corrosion and are suitable for any type of screwdriver.

No need to write on breakers - a special marking tape is included in the standard scope of supply.

Simple insertion of cables, wires through the stamped inlets for conductors on the rear and side walls of the casing. 

Vertical location of the casing provides easy installation and extra air circulation.

Precise alignment and secure installation of the casing on the wall provide points of fastening with the indication of dimensions between them.

Small distribution board

Mounting method

Width in number of modular spacings

Number of rows

Colour

Degree of protection (IP)

Height

Width

Depth

RAL-number

Material housing

With mounting plate

DIN-rail

Cover model

Built-in depth

EMC-version

Type of cover

With transparent cover

Extension possible

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Surface plastic empty enclosure SCHRN-P-36 modules IP41 LIGHT IEK

Паспорт - 1 шт.
Суппорт для шин - 2 шт.
DIN-рейка - 3 шт.
Шина 6х9мм, 8 отв. - 2 шт.
Шина 6х9мм, 10 отв. - 2 шт.
Лента маркировочная - 3 шт.
Комплект метизов - 1 шт.

Precise alignment and secure installation of the housing on the wall are ensured by mounting points with indication of dimensions between them.

The complete set of housings ensures simple and quick installation.

Easy insertion of cables and wires through stamped conductor entries on the rear and side walls of the housing.

The zero bus is mounted on a special panel. It can be easily removed and installed on the opposite side.

KREPTA 3 Wall-mounting plastic distribution enclosure 36 modules IP41 black

Винты, пластиковые дюбели, заглушки

Суппорт для установки клеммников, клеммники нейтрали и заземления

Perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity.
Rolled perforated trays IEK are made of cold-rolled steel coils, galvanized by a conveyor method or by dipping finished products in a zinc melt.
The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes.
For safety requirements, the product complies with IEC 61537.

KREPTA 3 Flush-mounting plastic distribution enclosure 36 modules IP41 white

Распаковка "KREPTA 3 Корпус пластиковый ЩРВ-П-36"

Fully equipped casing provide simple and quick installation.

Zero bus is mounted on a special panel. It can be easily removed and installed on the opposite side. It provides high security: the live parts are closed to prevent the intentional touching. Self-extinguishes at a temperature of 950°C.

KREPTA 3 Plastic housing ShchRN-P-36 IP41 black door black IEK

Patch cords are switching cords designed for switching the data transmission lines between different sections of switching panels, connecting the active switching or server equipment to the network, as well as for connecting the phones and computers to information sockets. The main characteristic of the cords is their resistance to multiple loads of bending and torsion, which is provided by a multi-wire conductor. The most common and popular types of connectors are RJ45-RJ45.

All ITK patch cords are marked with cable category, number of pairs, type and diameter of conductors, cord length. For ease of installation, reduction of errors in the termination and switching the lines in switchgears, as well as separation of cable lines, depending on the application, the range of ITK patch cords provides different color options.

The housing is sealed with a special gasket and additional glands.

Ease of installation and cable routing: large distance between the DIN rail and the rear wall of the case (from 20 to 35 mm), distance between DIN rails from 125 to 130 mm.

Possibility of mounting an additional stepped holder for N and PE busbars.

Captive screws for 1/4 turn quick fixing. This allows you to significantly reduce installation time.

For ease of use of the case, a change in the direction of opening the door is provided. When lightly pressed, the door is removed from the latches and installed on the other side.

To protect against unauthorized entry and access to the contact group, a hole for sealing is provided.

Convenient plastic lock. It is possible to replace the plastic lock with a metal one.

KMPn 2/36 IP55 hinged plastic housing for 36 (12x3) modular vending machines. off

Паспорт - 1 шт.
Суппорт для шин - 2 шт.
DIN-рейка - 3 шт.
Держатель DIN-рейки - 6 шт.
Шина 6х9мм, 8 отв. - 1 шт.
Шина 6х9мм, 10 отв. - 3 шт.
Лента маркировочная - 3 шт.
Комплект метизов - 1 шт.

Паспорт - 1 шт.
Суппорт для шин - 2 шт.
DIN-рейка - 3 шт.
Держатель DIN-рейки - 6 шт.
Шина 6х9мм, 8 отв. - 1 шт.
Шина 6х9мм, 10 отв. - 3 шт.
Ампула уровня - 1 шт.
Вставка для ввода труб - 1 шт.
Лента маркировочная - 3 шт.
Комплект метизов - 1 шт.

KMI AC contactors with thermal electrical relay in a protective enclosure represent a complete device consisting of a compact contactor KMI, RTI thermal electrical relay, enclosure with glands and control buttons. Intended for remote actuation by means of direct connection to the network and shutting down three-phase asynchronous electric motors with a short-circuited rotor for the applied voltage limited to 400 V as well as for protecting electric motors from overloads of inadmissible duration and overcurrents arising in case of one phase retardation. Applying KMI 10910 + KMI 23211 contactors predetermines the use of a plastic enclosure; KMI 34012 + KMI 49512 are supplemented with a metal one.
Correspond to the requirements of EN 60947-1, EN 60947-4-1, EN 60947-5-1.

DIN rail height adjustment using special brackets

Possibility of sealing the case using a plastic screw.

Possibility of inserting cable ducts and pipes of various diameters into the housing using a special insert.

Safety snap-on N/PE tire support protects against contact

Ease of installation due to the absence of side walls on the base of the body in wall-mounted models.

Number of doors

PRIME Wall-mounting plastic distribution enclosure 36 modules IP41 white

Adjusting the DIN rail height using special brackets

Easy installation due to the absence of side walls on the base of the body in wall-mounted models.

Mounting method	Поверхностного монтажа
Width in number of modular spacings	36
Number of rows	3
Colour	Белый
Degree of protection (IP)	IP41
Height, мм	473.0
Width, мм	307.0
Depth, мм	99.0
RAL-number	9016
Material housing	ABS пластик
Type of cover	Закрытого типа (закрывающаяся)
With transparent cover	Да
With mounting plate	Нет
Cover model	Закрытого типа (закрывающаяся)
Built-in depth, мм	-
Extension possible	Нет
EMC-version	Нет
DIN-rail	Да

KREPTA 3 Wall-mounting plastic distribution enclosure 36 modules IP41 white

Main specifications

Description

Basic documents

Design Features

Specifications

Documents

Set contains

Compatible Products

Analogs