Optical patch cords are used to switch optical communication lines and connect them to network and measuring equipment. An optical patch cord is a fiber optic cable terminated with an optical connector, if the cable is terminated with only one side, this kind of patch cord is called a pigtail. For our patch cords and pigtails we use only the best fiber produced by Corning, an important factor in the quality of the patch cord is also the quality of the connector and in our connectors we use only ferrules (Ferrule Connector) of the Japanese company Adamant.

The optical connecting cord is a patch cord terminated on different sides by different types of connectors. Pigtails can be single-mode and multi-mode.

For ease of use, the housing is provided with a change in the direction of opening the door. When lightly pressed, the door is removed from the latches and installed on the other side.

To protect against unauthorized entry and access to the contact group, a hole for sealing is provided.

Ease of installation and cable routing: large distance between the DIN rail and the rear wall of the case (from 20 to 35 mm), distance between DIN rails from 125 to 130 mm.

Handy plastic lock. It is possible to replace the plastic lock with a metal one.

The housing is sealed with a special gasket and additional glands.

Possibility of mounting an additional stepped holder for N and PE busbars.

Captive screws for 1/4 turn quick fixing. This allows you to significantly reduce installation time.

Small distribution board

Mounting method

Width in number of modular spacings

Number of rows

Colour

Degree of protection (IP)

Height

Width

Depth

RAL-number

Material housing

Cover model

Built-in depth

Type of cover

With transparent cover

DIN-rail

With mounting plate

EMC-version

Extension possible

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

KMPn 2/24 IP55 hinged plastic housing for 26 (13x2) modular vending machines. off

Шины N и PE с держателем и крышкой

Заглушки модульные и заглушки отверстий

Петли для навески дверцы

Замок с трехгранным ключом

Optical crosses are designed for switching the optical signals either from trunk lines or for distributing these signals over small server and office optical networks. They can be wall mounted or 19” version.

Larger distance between the DIN-rail and back wall.
The DIN-rail is adjustable in depth, plastic tabs are used to install it.

Easy and fast installation of glands for a variety of cross sections is possible due to break-out holes of different diameters, which are located on the top and bottom of the casing.

Removable holder of N and PE buses can be installed on the top and bottom of the casing onto the special fastening elements. N and PE bus are installed on a removable holder by means of simple latching in the seats.

Convenient and accurate installation of the casing is possible due to the special marking of fixing holes for mounting of the casing on the wall.

The direction of opening the front panel can be easily changed both to right and left at the place of installation due to the presence of plastic hinges.

Protection of casing against unauthorized access is provided by a triangular key lock.

Срок службы, Лет

KREPTA 7 Wall-mounting plastic distribution enclosure 24 modules IP66

Держатели DIN-рейки ступенчатого типа

Residual Current Circuit Breakers with Overload protection (RCBO) AD12 GENERICA ensure:
– versions with tripping settings 30 mA: protection of persons against electric shock in case of unintentional direct contact with live parts of electric equipment.
– protection against overload and short-circuit.

Mounting level in the housings 18, 24 and 36 modules.

Reversible door - easy installation and operation.

DIN-rail holder has step-type design to enable the adjustment of depth of the DIN-rail.

Availability of break out holes for wiring.

Possibility of sealing the enclosure door.

Mounting method	Скрытого монтажа (в штукатурку)
Width in number of modular spacings	2
Number of rows	1
Colour	Черный
Degree of protection (IP)	IP20
Height, мм	86
Width, мм	157
Depth, мм	7.8
RAL-number	7035
Material housing	Чугунный
Cover model	Закрытого типа (закрывающаяся)
Built-in depth, мм	40
Type of cover	С вырезом
With transparent cover	Нет
DIN-rail	Да
With mounting plate	Нет
EMC-version	Нет
Extension possible	Нет

KREPTA 5 Wall-mounting plastic distribution enclosure 24 modules IP55

Main specifications

Description

Basic documents

Design Features

Specifications

Documents

Passports

Set contains

Compatible Products