Block pass-through distribution PBDp-35 125/50A to DIN-rail (1x35-4x6mm2) IEK
Product ID:
Main specifications
| Number of poles | 1 |
| Nominal current, А | 125/50 |
| Number of connections total | 5 |
| Section of conductors connections at the input, мм² | 4...35 |
| Section of conductors connections at the outlet, мм² | 1,5...6 |
Advantages
- Fully symmetrical profile-Allows you to place panels in any side plane.
- High degree of protection IP54-55 - the panel is equipped with a cast rubber seal.
- High bearing capacity - load on the side/rear panel 50 kg.
- The panel is equipped with a stud M8, which allows you to connect the ground to the frame in the most optimal places.
- Unified connecters.
Design Features
Specifications
| Number of poles | 1 |
| Nominal current, А | 125/50 |
| Number of connections total | 5 |
| Section of conductors connections at the input, мм² | 4...35 |
| Section of conductors connections at the outlet, мм² | 1,5...6 |
| Nominal voltage, В | 660 |
| Mounting method | DIN-рейка / винт |
| Connection type | Винт |
| Material housing | Пластик |
| Ambient temperature, °C | -40...+105 |
| Number of connections 10 mm² | 0 |
| Number of connections 25 mm² | 0 |
| Number of connections 16 mm² | 0 |
| Number of connections < 6 mm² | 4 |
| Mounting temperature, °C | -20...+30 |
| Number of connections > 25 mm² | 1 |
| Depth, мм | 40.5 |
| Degree of protection (IP) | IP20 |
| Width, мм | 43.0 |
| Contact safe | Да |