IEK LED illumination systems allow creating the decorative lighting of furniture, niches, bar counters, windows and showcases, as well as backlight for interior elements: multilevel and suspended ceilings, cornices, skirtings. The LED illumination systems include a light source – LED ribbon and accessories (LED drivers, controllers and connectors).
The LED illumination system enables the following:
– illumination of various colors: warm white, cold white, blue, green, red, yellow or multi-color;
– selection of LED ribbon brightness;
– adjustment of LED ribbon brightness using the special device, controller;
– remote control of brightness and color gamma, automatic color changeover of multi-color ribbons, matching various tones and holding of preferred scene at any moment.
The drivers convert input mains voltage 220 V 50/60 Hz to 12 VDC required for supply of the LED ribbon.

Full range of accessories (vertical and horizontal bends, T-shaped and X - shaped taps) allows you to freely change the direction and level, making branches and organize cable runs of any complexity.

Bend for cable tray

Cable tray width

Height

Width

Corrosion Resistance Class

Suitable for circuit integrity

RAL-number

Mounting perforation in bottom

Colour

Cable tray height

Length

Degree of protection (IP)

Metal thickness

Material

Material quality

Ambient temperature

Wide span model

Change of direction

Deflection (angle)

Zinc coating thickness

Weight

Ambient class

Mounting temperature

Width branch

Stainless steel, pickled

Side wall perforation

Surface protection

Model

Поворот на 90 гр. серии ESCA. Краткое руководство по эксплуатации

Паспорта и РЭ

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

90° bend 100x400

Программа расчета кабельных трасс "Лотки 3.1"

Patch cords are switching cords designed for switching the data transmission lines between different sections of switching panels, connecting the active switching or server equipment to the network, as well as for connecting the phones and computers to information sockets. The main characteristic of the cords is their resistance to multiple loads of bending and torsion, which is provided by a multi-wire conductor. The most common and popular types of connectors are RJ45-RJ45.

All ITK patch cords are marked with cable category, number of pairs, type and diameter of conductors, cord length. For ease of installation, reduction of errors in the termination and switching the lines in switchgears, as well as separation of cable lines, depending on the application, the range of ITK patch cords provides different color options.

90° bend 100x400 IEK HDZ

Inner radius

Поворот плавный 90 градусов и 45 градусов серии ESCA. Краткое руководство по эксплуатации

Smooth bend 90deg type G01 ESCA 100x400mm IEK

Smooth bend 90deg type G01 ESCA 100x400mm HDZ IEK

automatic circuit breakers in the Pro.kvant type housing body for TMs for currents from 16 to 800 A are a modern solution to ensure uninterrupted power supply due to high nominal parameters, an extensive series of sizes and a flexible selection of release settings.
The automatic circuit breakers Pro.kvant TM are equipped with thermomagnetic processors, are supplied in three -pool or four -pole performance and are designed to protect electrical circuits from overloads and short circuits in the NKU of the distribution of electric energy, control and protection of equipment of residential, public and industrial buildings.
Designed for operation in electrical installations with a rated voltage of up to 690 in alternating frequency current of 50/60 Hz.

Аксессуары серии ESCA 3 толщиной 0,8 мм. Краткое руководство по эксплуатации

ESCA 3 Turn 90deg 100x400-0.8 RAL 9016 IEK

Esca 5 turn 90grad 100x400-0.8 RAL 9016 IEK

ARMAT series air circuit breakers (ACB) are designed to protect power supply networks in case of short circuits and overload, are also designed for quick switching on and off sections of electrical circuits and are designed for use in electrical installations with a rated operating voltage up to 690 V for rated currents from 630 up to 6300A.
These circuit breakers are equipped with electronic releases, with various combinations of a set of functionality, including the possibility of communication via the Modbus protocol, which, taking into account the breaking capacity up to 150 kA, allows the use of ACB ARMAT on any type of industrial and civil objects.
Correspond to GOST R 50030.2.

Ease of horizontal rotation of the cable route by 90 degrees.
Possibility to choose the color of the product to match the color of the interior room.

90° bend 100x400 RAL

Cable tray width, мм	400
Height, мм	100
Colour	Чисто белый
Change of direction	Горизонтальный (-ая)
Width branch, мм	400
Metal thickness, мм	0.8
Mounting perforation in bottom	Нет
Suitable for circuit integrity	Нет
Degree of protection (IP)	IP20
Corrosion Resistance Class	2
Side wall perforation	Нет
Surface protection	EV008895
Material quality	Сталь оцинкованная
Width, мм	400
Ambient class	У2, ХЛ2, УХЛ2, ОМ2
Mounting temperature, °C	-50...40
Weight, кг	3,05
Stainless steel, pickled	Нет
Material	Сталь
Model	Интегрированный разъем
Cable tray height, мм	100
Deflection (angle)	90
RAL-number	9016
Ambient temperature, °C	-50...40
Zinc coating thickness, мкм	10
Wide span model	Нет
Length, мм	550

90° bend 100x400 RAL

Main specifications

Description

Basic documents

Design Features

Specifications

Documents

Passports

Software

Compatible Products

Analogs