System installation can be performed by one installer. The main tool needed for mounting tracks is cutter.

Maximum ventilation of the laid cable route.

Together with the tray a partition can be used, which serves to separate the tray into two or more sections in case of mounting the wires of different types (and power information) in one tray in order to avoid interferences.

For fixing the tray to the walls and ceiling, a wide range of multipurpose fasteners is offered, allowing to perform a cable system of any complexity.

Possibility to form multi-level systems while keeping easy access to the cable routing.

The system is represented by a small number of universal connecting components that can be used in many ways to solve a single task. You can mount the new racks, trays combine the old with the new ones, make a branch from an existing route.

The wire tray can serve as a grounding bus. Accordingly, there is no need to purchase and lay copper cable as a grounding bus. It reduces the cost of materials and work, saves time.

Rounded edges of all cuts maximize injury prevention for assembling staff and avoid damage to the cable from sharp edges of the wire.

The upper longitudinal wire protrudes slightly beyond the dimensions of the tray, so you can use a locking cover together with a tray. The lock on the cover allows it to be fixed securely during vertical mounting of cable routing.

Mesh cable tray

Width

Height

Wire cross-section

Surface protection

Length

Profile shape

Model

Material

Weight

Integrated partition

Material quality

Системы проволочных лотков. Руководство по эксплуатации

Паспорта и РЭ

Срок службы, Лет

Гарантийный срок, Лет

Количество

Единицы измерения

Тип упаковки

Материал упаковки

Штрихкод

Вес брутто, кг

Объем, м^3

Длина, см

Ширина, см

Высота, см

Способ нанесения информации

Wire tray NESTA 35x200x3000-3,8 HDZ IEK

KMI AC contactors of general industrial purpose are designed for load currents from 9 to 95 A (AC-3). Intended for actuating, shutting down and reversing of asynchronous motors equipped with a short-circuited rotor for the applied voltage limited to 660V, remote control of lighting (AC-5a, AC-5b), heating circuits and various low-inductance loads (AC-1), switching three-phase capacitor batteries (AC-6b) and primary windings of three-phase low-voltage transformers (AC-6a).
All unit types per load currents limited to 40 A have a single group of auxiliary NO or NC contacts.
Types per load currents exceeding 40 A have two contact groups (NO and NC).
KMI AC contactors 9-95 A application includes fan, pump, thermal curtain, furnace, overhead-track hoist, unit, lighting and automated load transfer systems control.

Colour

Wire-mesh cable tray 35x200 IEK

Программа расчета кабельных трасс "Лотки 3.1"

M10N circuit breakers are designed to protect distribution and group circuits with different loads.
Modular circuit breakers with characteristics Z, K, L have been successfully tested according to IEC 60947-2. They have all the advantages of modular equipment of the ARMAT series: increased body strength, reinforced arc chute, independent trip mechanism, etc. 
 This type of circuit breaker is recommended for use in input distribution devices for industrial and energy infrastructure facilities.

Width, мм	200
Height, мм	35
Wire cross-section, мм	4.8
Surface protection	Оцинковка по методу Сендзимира
Length, мм	3000

Width, мм	200
Height, мм	35
Wire cross-section, мм	4.8
Surface protection	Оцинковка по методу Сендзимира
Length, мм	3000
Model	Без разъема
Material quality	Сталь оцинкованная
Integrated partition	Нет
Profile shape	U-образная форма
Srewless connector	Нет
Colour	Серебристый
Material	Сталь
Weight, кг на м	1,22

Reinforced wire-mesh cable tray 35x200

Main specifications

Description

Design Features

Specifications

Documents

Compatible Products

Analogs